Transport Incubator (Order Number: IIC0433)
Brief Introduction:
  Air mode and Baby mode controlled
by micro-computer;
  Use AC Power and DC Power
alternatively, DC 12V or DC 24V Power on the ambulance;
  Set temperature, air temperature,
baby temperature and internal battery voltage can be displayed separately;
  Failure alarm indication;
  Double wall Acrylic glass hood
with side door so that thebassinet can be pulled out from it;
  Natural air flow humidity;
  The height of whole unit can be adjusted;
  With Oxygen cylinder and Oxygen
supply configuration;
  Observation lamp.
Standard configuration
Main body(including the hood, controller, bassinet, internal battery, and observation lamp) oxygen cylinders, oxygen supply system, skin temperature sensor, IV pole, mattress, adjustable stand.
Optional configuration:>37degree, overrid tempeature mode
1. AC power supply: AC220V-230V/50HZ
2. DC power supply: DC12V/10A or DA24V/6A
3. Input power: 400VA
4. Model of control: air mode and baby model controlled by micro-computer
5. Air temperature control range: 25 ℃-37℃ override mode: 37-38℃
6. Baby temperature control range: 34-37℃ override model:37-37.5℃
7. Skin temperature sensor accuracy: ≤0.3℃
8. Temperature variability: ≤1℃
9. Temperature uniformity: ≤1.5℃(mattress is on the horizontal position)
10. Noise inside hood: ≤155dB(A)(environment noise ≤45dB(A))
11. Failure alarm: over-temperature alarm, temperature deviation alarm, sensor alarm, motor fan failed alarm, power failure alarm and so on
12. Oprating at temperature equilibrium: 90min(set temp 36℃ ambient 15℃)
Environmental temperature
13. Operating range: 10-30℃(set temp should be higher 3℃ than environmental temp)
14. Ambient air movement rate: ≤1.0m/s
15. Package: each unit is packed as two cartons
16. Size(main body): 109*65.5*76cm
17. Size(Cabinet): 138*61*40cm
18. Gross weight(main body): 80kg
19. Gross weight-Cabinet: 53kg
Infant incubator with automatic ambulance stretcher base